Overhead Fiber Optic Cable Installation

Lashing fiber optic cable to a messenger cable the installation process of a lashed aerial fiber optic cable will generally require one or more bucket trucks to allow workers to reach the location of the lashing guide cables around poles and through trees or other obstacles and move the lasher across poles.

Overhead fiber optic cable installation.

Aerial fiber optic cable refers to a kind of fiber optic cable that is designed and used for outside plant osp installation between poles by being lashed to a wire rope messenger strand with a small gauge wire. Generally speaking they are usually made of heavy jackets and strong metal or aramid strength members. After the fiber optic cable is installed into a duct or innerduct end plugs should be installed to provide an effective water seal. Since we cannot pinpoint the real cost range let us just use a reference point.

Do not mix copper cable and fiber cable in the same ducts or trays. That s a wide range if you ask us if you translate it to the overall cost. Pioneered in the early 1980s the helical wrap method used a machine to wind a fiber optic cable around an existing power line. Fiber optic cables should not be mixed with copper cables as the heavier copper cables can stress the fiber cables.

A steel messenger is first installed between the poles. Fiber optic cables should be placed in their own dedicated ducts or trays. This fact is not relevant to traditional aerial fiber deployment but it is of great significance to a less common method of fiber optic installation known as helical wrap or optical attached cable. Installation of the cable must be carefully done to prevent snagging and kinking the cable as it is pulled among the numerous hazards in a typical building installation.

When installing fiber optic jumper cables and copper patch cords from the patch panel to active ports within the same cabinet use a combination of horizontal and vertical cable management to route cables from the left side of the patch panel to left side active ports and the right side of the patch panel to right side active ports. According to different aerial cable types there are generally two installation ways. Accesswrap is a technique that installs a fibre optic cable onto an overhead electricity distribution line by wrapping it securely onto one of the power conductors.