Pafc Fuel Cell Reaction

They are quite resistant to poisoning by carbon monoxide but tend to have lower efficiency than other fuel cell types in producing electricity.

Pafc fuel cell reaction.

The overall fuel cell reaction is 2h 2 o2 2h 2 o heat. Liquid phosphoric acid pa dispersed in a silicon carbide matrix acts as the electrolyte. A phosphoric acid fuel cell pafc is composed of two porous gas diffusion electrodes namely cathode and anode juxtaposed against a porous electrolyte matrix. Pafcs use liquid phosphoric acid as an electrolyte and run on hydrocarbon fuel.

The gas diffusion electrodes are composed of a porous substrate carbon or cloth facing the gas feed and a reactive catalyst layer consisting of platinized fine carbon powder facing the electrolyte. Owing to the low temperature operation faster response to load transients and short start up time less than a minute the pemfc is suitable for propulsion applications. Molten carbonate fuel cells mcfc. The pafc differs from other fuel cell technologies mainly on the basis of the electrolyte used and the method of hydrogen generation for the cell reaction.

A substantial number of pafc systems fueled with natural gas are already in operation around the world. The resultant reaction is 2h o2 2e h 2 o. This paper presents the dynamics of a phosphoric acid fuel cell pafc and its associated power electronics. Protons h are transported from the anode to the cathode.

Phosphoric acid fuel cells pafcs consist of an anode and a cathode made of a finely dispersed platinum catalyst on carbon and a silicon carbide structure that holds the phosphoric acid electrolyte. Phosphoric acid fuel cell pafc a type of fuel cell in which the electrolyte consists of concentrated phosphoric acid h 3 po 4. Unlike other fuel cell technologies pafc is very resistant to poisoning by carbon monoxide and the fuel cell is able to operate with lower hydrogen and oxygen quality. Hydrogen is able to permeate the phosphoric acid while electrons are not.

Excess airflow on the cathode side helps to remove the water resulting from the reaction. The efficiency of the pemfc is about 40 50 and its operating temperature is about 80 c 100 c. Proton exchange membrane fuel cell pem. The reaction process is similar to pemfcs with hydrogen being removed from the fuel via the assistance of a platinum catalyst.

The operating temperature range is generally 160 220 c. Phosphoric acid fuel cells pafc are a type of fuel cell that uses liquid phosphoric acid as an electrolyte. They were the first fuel cells to be commercialized. The mcfc works at a relatively high temperature higher than 600 c.