The most commonly used and available type of paint for metal doors is latex.
Painting a steel door with latex paint.
It s better to have that happen before the faces are painted.
Paint a metal door metal doors offer great benefits in security and weather resistance but to keep their surfaces welcoming and rust free you have to keep up with the painting.
You have three methods of application to choose from brushing rolling or spraying.
A steel door needs extra special care when it s painted because the wet paint can easily be manipulated by the tool that s applying it.
Brushing steel doors probably the.
Subscribe to this old house.
When painting edges some paint inevitably slops onto the faces of the door.
A heavy coat of paint covers better and sometimes levels out better but runs are more likely and brush marks are deeper.
Painting metal doors with latex.
I have found that applying blue painters tape onto the weatherstrip and leave it on a few weeks avoids that.
Paints that are made for galvanized surfaces will require less prep work and will adhere better than other kinds of paint.
This is an easy to use water based paint that doesn t require extra skill or.
Before you apply the primer and paint lightly sand the door with 400 grit sandpaper so the primer and paint will stick to it better.
Then apply 2 coats of the primer letting it dry after each coat.
Brush on a light coat.
However you will have to use an oil based exterior primer before you paint.
To paint a steel door you ll need exterior paint and an oil based primer designed specifically for metal.
Applying the paint is the most satisfying part of painting a steel door plan on a minimum of one coat of primer and two coats of finish.
5 painting a steel door and side lights.
Since you mentioned that you are in direct sun most of the day i would highly recommend using a paint that is fade resistant.
If painting your door with oil based paint doesn t sound appealing to you you can use an exterior latex based paint.
Paint all four edges of the door first.
Also latex enamel doesn t truly cure for a week or more and when door is closed it may stick to the weather stripping around the door frame and pull the paint off around the door edges.
When it s on slick steel paint doesn t absorb into the material and laydown and you re going to have a rough looking texture in your paint finish.