Painting Bare Metal Car

This allows you to see what s hiding under the existing finish and ensure that any damage is properly repaired.

Painting bare metal car.

Gibbs brand however produces a penetrating oil that is known to be one of the most popular products for bare metal hot rods and it applies easily with a paper towel. So the easy way to select your paint materials is to go through variouscompanies paint chip books find the color you want for your car thenuse that company s paint materials from the bare metal. Click here for a free guide to painting a car. First put your contour p.

Surface rust sets in almost immediately with even a small amount of moisture in the presence of a bare metal surface. It protects bare metal surfaces like a lubricant but it can also be painted over so using gibbs brand isn t a point of no return scenario. Most full restorations involve stripping the vehicle down to bare metal. I think you need to apply primer to the bare metal before painting.

Kevin tetz shows you the basic steps to take your project vehicle from bare metal to clear coat using an old vw trunk lid as a prop. Painting over bare metal. One of the reasons gibbs brand is so popular is because it immediately penetrates the smallest pores of the metal surface to prevent oxidation and it even claims to remove rust. Leaving bare metal exposed to weather can put your restoration job into reverse.

Prep the area bare metal or epoxy primer with 60 80 grit sandpaper so the filler has a good texture to adhere to. A good coat of primer will help prevent damage to your metal work in between work sessions or if your car has to sit dormant for a time while you. Because bare metal starts to rust almost immediately it s a good idea to apply a primer as soon as possible. This will give a more even finish and better adhesion when new primer and paint is applied.

After you have stripped off the old paint abraded the surface and fixed body damage you can now move on to sealing up the surface by applying a primer to the vehicle before applying color. It also allows dents and imperfections to be repaired and filled without adding further work. The best course of action is to completely remove the old paint and the primer exposing bare metal. Follow the manufacturer s instructions on the side of the can for best results.